General Instructions: Only electronic Word Manuscripts (.doc or .docx) can be submitted by the corresponding author(s) through the online submission or by mailing . There is no page limit. The submitting author takes responsibility for the paper during submission and peer review. If for some technical reason submission through the online submission is not possible,
Papers must be submitted on the understanding that they have not been published elsewhere and are not currently under consideration by any other publisher. The submitting author is responsible for ensuring that the article’s publication has been approved by all the other coauthors. Only an acknowledgment from the editorial office officially establishes the date of receipt. Further correspondence and proofs will be sent to the author(s) before publication unless otherwise indicated. All enquiries concerning the publication of accepted papers should be addressed to
Paper Selection and Publication Process:
a) Upon receipt of a submission, the editor sends an e-mail of confirmation to the submission’s author within one to three working days. If you fail to receive this confirmation, your submission e-mail may have been missed.
b) Peer review: We use a double-blind system for peer review; both reviewers’ and author’s identities remain anonymous. The paper will be reviewed by at least two experts: one editorial staff member and at least one external reviewer. The review process may take two to four weeks.
c) Notification of the result of review is by e-mail.
d) If the submission is accepted, the authors revise accordingly and have to pay the Article Processing Charges.
e) A PDF and HTML versions of the journal is available for download on the journal’s webpage free of charge.
a)Language: Please write your text in proper English; American or British usage is accepted, but not a mixture of both. We only accept manuscripts written in English.
b)Length of Paper: Papers between 3 000 and 8 000 words are preferred.
c)Title Page: To ensure the integrity of the peer review process, every effort should be made to prevent the identities of the authors and reviewers from being known to each other. When you upload a submission file, author identities should be removed from it. You should upload the title page as a supplementary file for the editor to review.
d)Title: The title is often used in information-retrieval systems and should be no more than 12 words in length and not contain abbreviations or words that serve no purpose.
e)Authors’ Names and Affiliations:
Authors name should be as:
Kamal Kishore1, Yogesh Kumar Walia1,2, Sanjit Kumar Mahato1* & Atul Kapil2
1 School of Basic Sciences, Deptt. Of Chemistry, Career Point University, Rajasthan, INDIA
2 School of Basic Sciences, Himachal Pradesh University, Shimla, INDIA
*Correspondence: School of Basic Sciences, Career Point University, Rajasthan, INDIA.
Orcid ID (mention for all and corresponding authors): https://orcid.org/XXXX-XXXX-XXXX-XXXX
f) General Rules for Text: Please use the following rules for the entire text, including abstract, keywords, Materials and Methods, Results and Discussions, Conclusion, Acknowledgements and references.
Font: Times New Roman; Size: 12 pt.
Paragraph Spacing: Above paragraph — 0 pt.; below paragraph — 6 pt.
Line Spacing: fixed, Single
Heading 1: Times New Roman; 12 pt.; Bold; for example, First-level Heading
Heading 2 or sub heading: Times New Roman; 12 pt.; Bold; Italic; for example, Second-level Heading
Heading 3 sub-sub heading: Times New Roman; 12 pt.; Italic; for example, Third-level Heading
Heading 4 sub-sub-sub heading: Times New Roman; 12 pt.; for example, Third-level Heading
g) Abstract: The manuscript should contain an abstract. The abstract should be self-contained and citation-free and should be between 150 and 250 words. Also Provide four to ten appropriate keywords after abstract. Each keyword should be separated by “ ; ” (semicolon) and Keywords should be arranged alphabetically with first letter of each word in capital.
h) Introduction: This section should be succinct, with no subheadings.
i) Materials and Methods: This part should contain sufficient detail so that all procedures can be repeated. It can be divided into subsections if several methods are described.
j) Results and Discussion: This section may each be divided by subheadings or may be combined.
k) Conclusion: This should clearly explain the main conclusions of the work highlighting its importance and relevance.
l) Acknowledgements: All acknowledgments (if any) should be included at the very end of the paper before the references and may include supporting grants, presentations, and so forth.
m) References: References should be numbered sequentially as 1. 2. 3. 4. and so on (Bold) in the order in which they are first mentioned in the text (not in alphabetic order). References should be cited in the text as superscripts only, references should appear as consecutive numbers in superscript as 1 or 1, 2 & 3 Superscript(s) numbers appear outside the punctuation if the citation applies to a whole sentence or clause. The list of references should be formatted as follows:
For Articles in Journals: Indicate the last name, initial(s) of the author(s) separated by semicolon. Title. Journal name/abbreviation in italic. year of the reference as bold, volume number (Issue number), page numbers.
Smith, M.; Gaur, G.; Mehta H. S. Synthesis and structural analysis of ZnO nanoparticles. Asian J. of Adv. Basic Sci. 2005, 1(2), 123-129.
Mellers, B. A.; Gaur, S. P. Choice and the relative pleasure of consequences. Psychological Bulletin. 2005, 12(6), 910-924. http://dx.doi.org/10.1037/0033-2909.126.6.910
For Books:the last name, initial(s) of the author(s) separated by semicolon, full title of the book in italic. Publisher: city, year, pages.
Mishra, S. S.; Morgan, S.; Charlton P. Quantum Mechanics. Allen publisher: New York, 2008, pp 11-13.
Conference Proceedings: Please add all available data such as title, date, and place of the conference as well as publisher, place, and year of publication or, alternatively.
Ansell J., Harrison I. and Foxon C. T.: Proceedings of the 4th International Conference on Chemistry, Colorado, USA, 2001, Part A (Wiley-VCH, Berlin, 2002) 279-282.
References to Online Material: Should include a brief description and or title as:
ACS Publications Division Home Page. http://pubs.acs.org (accessed Nov 7, 2004).
Reference to a Thesis: Author last name, initial(s). Title, D.Sc. /Ph.D./ M.Sc./ B.Sc. Thesis, university name (city), Month Year.
Agutter, A. J. Capturing the Spectra of Silicon Solar Cells. Ph.D. Thesis, Edinburgh University (Edinburgh), December 2009.
n) Figure Preparation: Upon submission of an article, authors are supposed to include all figures and tables in the PDF or doc file of the manuscript. Figures and tables should not be submitted in separate files. If the article is accepted, authors will be asked to provide the source files of the figures. Each figure should be supplied in a separate electronic file. All figures should be cited in the paper in a consecutive order. Figures should be supplied in either vector art formats (Illustrator, EPS, WMF, FreeHand, CorelDraw, PowerPoint, Excel, etc.) or bitmap formats (Photoshop, TIFF, GIF, JPEG, etc.). Bitmap images should be of 300 dpi resolution at least unless the resolution is intentionally set to a lower level for scientific reasons. If a bitmap image has labels, the image and labels should be embedded in separate layers.
o) Equations: The text size of equations should be similar to normal text size. The formula should be placed center justified with serial number on the right. For example:
p) Tables: Number tables consecutively in accordance with their appearance in the text. Place a table’s caption above the table’s body and its description below the body. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
Table 1: Estimated Distance (cm) for Letter and Digit Stimuli.
Note. CI=confidence; LL=lower limit, UL=upper limit.
You may resize the tables to fit the page size.
q) Figures and Schemes: Number figures consecutively in accordance with their appearance in the text. Place a figure’s caption and description below the figure body. A minimum resolution of 300 DPI is required. You may resize the figures or schemes to fit the page size.
Figure 1: Figure Title
Note. Avoid abbreviating the titles of tables, figures, and equations (i.e., Tab. 1, Fig. 2, Eq. 3) in the caption or in running text. Do not write “the table above/below” or “the figure on page 32,” because the position and page number of a table or figure cannot be determined until the pages are typeset.
Article Processing Charges (APC) :
Average Article prorcessing time (APT) is 50 days
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Article Template File [DOWNLOAD ARTICLE TEMPLATE FILE]
Copyright form [DOWNLOAD COPYRIGHT FORM]